The Powerbar V8 developed for the Aquarino goes beyond a power strip. It is essential for the full control and automation of your aquarium.
 
 With 8 sockets and a capacity of 10 A per Powerbar, you can connect all the equipment in your aquarium.  Aquarino supports two Powerbar V8s, totaling 16 outlets.
 
 Retire your plug timers with Aquarino  + Powerbar v8. 
 Create schedules for the time each outlet must turn on and off, various settings, everything is possible.
 
 Trigger equipment through Aquarino's automation rules.
 Ex: If the temperature is above 30 degrees, turn on the cooler or chiller outlet.
 
 Define which outlets should be turned off during the fish feeding period, ideal to prevent pumps and other equipment from sucking fish food.
 
 Select which outlets to keep running in the event of a power outage, keeping only what is really necessary to sustain life in your aquarium. To do this, just add the Aquarino Failover module.
 
 The Powerbar V8 is connected to the Aquarino aquarium controller via a 2 meter mains cable (included). Cable can be up to 10  meters using CAT6 or CAT7, giving a lot of freedom for aquarium setups of various sizes.
 
 The coolest thing about this accessory is that it can be connected to any voltage, the power input can be connected to 12V, 110V, 220V or any other voltage. It is common to have 12V coolers, 24V pumps and other equipment with different voltages in our aquariums. The voltage that you plug into the power input will be the voltage that will come out of the outlets.
 
 Included in:
 1x Powerbar V8
 1x 2 meter CAT5 network cable